Overview
The EC IP66 range of ferrite permanent magnet DC electric motors is purpose built for environments where moisture, dust and washdown conditions would compromise a standard motor. Rated to IP66 under IEC/EN 60529, these motors provide full protection against dust ingress and high pressure water jets, making them a reliable choice across food processing, marine, agricultural and outdoor industrial applications throughout Australia.
With a compact tubular construction that requires no external fan, the EC IP66 series delivers high torque density from a small footprint. Each motor runs on low voltage 12 or 24 Vdc supply, which makes them well suited for battery powered mobile plant, solar installations and environments where low voltage safety is a priority.
The range spans six frame sizes from 42 mm through to 110 mm diameter, covering continuous power ratings from 70 W (S1) up to 600 W (S1), or 100 W to 800 W on S2 intermittent duty. Whether you need a small actuator drive or a robust motor for a conveyor system, there is an EC IP66 model to match.
Key Features
The standout characteristic of the EC IP66 series is its sealing system. A machined front shield combined with radial seal rings, an O-ring and closed fastening holes ensures the interior is thoroughly protected against water and particulate ingress. This is not simply a splash rating; IP66 means the motor can withstand direct high pressure water jets from any direction.
Ferrite permanent magnets generate the magnetic field, providing consistent performance without the need for field winding power. This contributes to a simpler, more efficient design with fewer components that can wear or fail. Ball bearings are fitted as standard across all models, supporting smooth operation and extended service intervals.
High starting torque is another defining trait of this range. Applications that demand strong breakaway force under load, such as conveyors, winches and actuator mechanisms, benefit from the torque characteristics these motors offer right from standstill. Combined with a rated speed of 3000 RPM, the EC IP66 motors pair effectively with the Transtecno range of gearboxes to achieve the output speed and torque your application requires.
Available Models
The EC IP66 range includes models across six frame sizes, each available in 12 Vdc and 24 Vdc variants:
EC070 (Ø 65 mm) delivers 70 W continuous (S1) or 100 W on S2 30 minute duty, with a nominal torque of 0.22 Nm at 3000 RPM and a weight of just 1.7 kg.
EC100 (Ø 81 mm) provides 100 W continuous or 140 W S2 25 minute duty, producing 0.31 Nm at 3000 RPM in a 2.7 kg package.
EC180 (Ø 81 mm) steps up to 180 W continuous or 250 W on S2 25 minute duty, with 0.57 Nm nominal torque at 3000 RPM and a weight of 3.4 kg.
EC250 (Ø 104 mm) delivers 250 W continuous or 350 W S2 25 minute duty, with 0.8 Nm torque at 3000 RPM. This model features four magnets and eight mounting holes, weighing 4.15 kg.
EC350 (Ø 110 mm) provides 350 W continuous or 500 W on S2 30 minute duty with 1.12 Nm at 3000 RPM. Weight ranges from 5.1 to 5.3 kg depending on the voltage variant.
EC600 (Ø 110 mm) is the largest in the range, offering 600 W continuous or 800 W S2 30 minute duty. Nominal torque reaches 1.91 Nm at 3000 RPM, with a weight of 6.6 to 7.1 kg.
Common Applications
Australian businesses across a wide range of industries rely on IP66 rated DC motors where standard enclosures simply will not last. In food and beverage processing, the ability to withstand daily washdown cycles without moisture ingress keeps production lines running and maintenance costs down.
In marine and coastal settings, exposure to salt spray and humid conditions demands a motor that will not corrode or fail prematurely. The sealed construction of the EC IP66 is well suited to boat winches, dock equipment and coastal processing facilities.
Agricultural operations benefit from the dust tight rating and low voltage supply. Whether fitted to irrigation equipment, grain handling systems or mobile farm machinery running off battery banks, these motors handle the conditions regional Australia demands.
For outdoor material handling, the combination of IP66 protection and compact dimensions means these motors can be integrated into conveyor drives, gate operators and automated equipment exposed to weather without the need for additional enclosures.
Selection Considerations
Choosing the right EC IP66 model starts with understanding your duty cycle. The S1 (continuous) and S2 (short time) power ratings differ across each model, so matching the motor to your actual operating profile ensures you get reliable performance without oversizing or overloading.
Voltage selection between 12 Vdc and 24 Vdc will depend on your existing power infrastructure. The 24 Vdc variants draw roughly half the current of their 12 Vdc equivalents for the same power output, which can simplify cabling and reduce voltage drop over longer cable runs.
If your application requires a lower output speed or higher torque than the motor alone provides, the EC IP66 range is designed to pair directly with Transtecno gearboxes. This modular approach lets you tailor the final drive characteristics precisely to your machine requirements.
For detailed dimensional drawings, performance curves and gearbox compatibility, our team can provide the full technical catalogue and application guidance.
Support And Enquiries
Motordrives Australia supplies the full EC IP66 ferrite DC motor range with local technical support. Whether you are specifying a new build, replacing an existing motor or exploring options for a washdown upgrade, we can assist with model selection, gearbox pairing and lead time information.
Complete the enquiry form on this page or contact us directly to discuss your requirements. We are here to help you find the right motor for the job.
